Accessory packages.

Be prepared and flexible with our packages for your DATRON neo and DATRON neo+. We have experience and know-how that we can share with you for your benefit!

  • Ideal for DATRON neo
  • Accessories to help you get started milling right away

Scope of delivery:

  • 1x adapter insertion tool for 6mm and 8mm collets
  • 1x insertion tool for tools with 8mm shaft diameter
  • 1x adapter collets 3mm to 8mm diameter
  • 1x adapter collets 1/8‘‘ to 8mm diameter
  • 3x adapter collets 6mm to 8mm diameter
  • 6x limit stop ring 8/12.5mm, brass
  • 3x limit stop ring 8/18 mm, brass
  • 1x steel
  • Ruler 300 mm
  • Cleaning agents and lubricants
  • Filter and seal kit
  • Spindle coolant Antifrogen N

With consistent use, "Antifrogen N" spindle coolant protects the cooling circuit against corrosion, algae and calcification and thus extends the life of spindle components.

DATRON neo Vacuum Table can hold even the smallest of parts on the worktable.

DATRON vacuum chuck segments offer maximum clamping force and ease of use, achieved by the special DATRON vacuum distribution. Two vacuum chucks specifically designed for DATRON neo are operated separately via connectors recessed in the worktable. Each chuck is subdivided into 10 segments that - depending on component size - can be activated individually. To distribute the vacuum optimally below the workpiece, we have developed the DATRON VacuCard, a special cardboard, which serves as a sacrificial layer.

Description:

Ideal for DATRON neo

  • For easy and secure clamping of sheet material
  • Includes all accessories and consumables required for use of DATRON neo vacuum technology 

Scope of delivery:

  • 2x vacuum chuck segment 500mm x 200mm (includes limit stop rings and mounting material)
  • 1x vacuum pump
  • 20x VacuCard 500mm x 200mm
  • 20x VacuCard 500mm x 400mm
  • 1x vacuum key
  • 1x double flute end mill stepped with edge radius (for facing vacuum module clamping plates)
DATRON neo Dust Extraction System is the perfect solution to remove small chips during the milling process.

Description:

Ideal for DATRON neo

  • Removes dust and small chips for a cleaner machining area and better quality parts
  • Installation by the customer is possible
  • Height adjustment within the control
  • Automatic mode
  • Not for use with coolant

Scope of delivery:

  • Extraction system consisting of suction head with brush and lifting unit
  • Vacuum with air filter
  • Hoses
DATRON neo Pneumatic Work-holding is easy to setup, easy to use and the perfect starter set for this machine. Quick placement with no need to screw anything down - just air pressure.

The pneumatic-clamping system moves with the click of a button to ensure quick job setup and changeover. According to your needs, you can use it on a T-slot plate or in stationary manner.

Description:

  • Ideal for DATRON neo
  • T-nut plate for flexible clamping capability
  • Short-stroke clamping element for quick and secure clamping of work pieces with one hand

Scope of delivery:

  • 1x T-nut clamping plate right
  • 1x T-nut clamping plate left
  • 2x short stroke clamping element KSE-PH
  • 1x dove tail milling tool

Scope of delivery:

  • 1x USB keyboard black (dust- and waterproof according to IP 68)
  • 1x metal holder
  • 4x screws for mounting on display holder
  • cable tie

Description:

  • Avoids the penetration of chips into the tool depot: especially for machining plastics and lubricants containing oil
  • Easy to retrofit

Scope of delivery:

  • depot cover
  • mounting material
  • USB stick with license key

Description:

  • To extend the possibilities with regard to multi-sided machining, round engraving
  • Positioned on the left side of the machine table
  • A module clamping plate with centring cone and a recessed grip enables fast and precise positioning on the machine table
  • Easy to retrofit

Technical specifications:

  • Center height: max. 55 mm (different when using the optional accessories)
  • Plug&Play capability
  • Mounting: Flat surface with D=106 mm nd centric fit (34h6)
  • Drive: 200 Watt AC-Servo with toothed belt, multi-turn absolute encoder
  • Modulo-360° operation
  • Resolution: < 0,0001°
  • Maximum speed: 60 1/min
  • Dimensions (X x Y x Z): 109 mm x 244 mm x 145 mm

Scope of delivery:

  • Rotary axis on module clamping plate
  • Rotary axis control
  • License 4th axis for DATRON next control unit

Optional accessories:

The optional accessories for the rotary axis will be arranged according to your requirements

  • neo tailstock
  • neo three-jaw chuck
  • neo centric clamps

ONLINE SHOPPING: TOOLS & CONSUMABLES

The design and the quality of cutting tools largely determine the cost effectiveness and quality of CNC machining. Due to years of experience and the constant dialogue with our customers, DATRON provides fast and high-quality tooling solutions for optimal machining. Ask your local DATRON sales partner for details.

 

DATRON Dynamics Online-Shop